MOFIN Kühlerfrostschutz M40 - passend für Fahrzeuge bei denen ein Kühlmittel nach Spezifikation G40 gefordert wird.
- Langzeit-Kühlerschutz
- Premium-Vollkonzentrat
- Kälteschutz Mischung 50 : 50 -37°C
- nitrit-, amin-, phosphat-, boraxfrei
- Farbe: violett/lila
- Spezifkationen: VW TL 774 G (Audi, Seat, Skoda, VW), MAN Si-OAT, MB-Freigabe 325.5
MOFIN Kühlerfrostschutz M40 ist ein, auf Ethylenglykol basierendes, Frost- und Korrosionsschutzkonzentrat zum Einsatz in Motoren mit und ohne Aluminium-Legierung. Es besitzt eine
sehr gute Wärmeübertragung und ist nitrit-, amin- und phosphatfrei. Vor der Verwendung muss MOFIN M40 mit Wasser verdünnt werden.
MOFIN Kühlerfrostschutz M40 schützt alle modernen Motoren, insbesondere hoch belastete
Aluminiummotoren hervorragend vor Frost, Rost und Überhitzung. Es verhindert wirkungsvoll Korrosion und Ablagerungen im Kühlsystem mit seinen wichtigen Bauteilen wie Kühlkanälen im Zylinderkopf, Motorblock, Kühler,Wasserpumpe und Heizungswärmetauscher.
MOFIN M40 erfüllt folgende Spezifikationen:
• VW/Audi/Seat/Skoda/Lamborghini/Bentley/Bugatti TL 774-G
Freigabe für MAN 324 Typ SI-OAT, MB 325.5
Mischungstabelle:
Frostschutz bis ca. | Anteile Frostschutz | Anteile Wasser |
- 18° C | 33% | 67% |
- 38° C | 50% | 50% |
MOFIN M40 ist in originalverschlossenen, luftdichten Gebinden bei Temperaturen bis 30°C mindestens 3 Jahre lagerfähig. Die Lagerung sollte jedoch aus Korrosionsschutzgründen nicht in verzinkten Behältern erfolgen.
Für MOFIN M 40 liegt ein Sicherheitsdatenblatt gemäß EG-Richtlinie 91/155/EWG vor.
Beim Umgang mit MOFIN M40 sind die für den Umgang mit Chemikalien notwendigen Vorsichts- und arbeitshygienischen Schutzmaßnahmen sowie die in unserem Sicherheitsdatenblatt enthaltenen Angaben und Hinweise zu beachten. Die Berührung mit der Haut ist zu vermeiden.
MOFIN Kühlerfrostschutz M40 ist ein mit normalem Leitungswasser problemlos mischbares Kühlerfrostschutz-Konzentrat. Die Konzentration des Kühlerschutzmittels soll nicht unter 35% liegen, da
andernfalls die Korrosionsschutz-Zusätze in zu großer Verdünnung vorliegen. Auch im Sommer muss
ausreichend Kühlerschutzmittel im Kühlwasser enthalten sein, um einen guten Korrosions- und Überhitzungsschutz zu gewährleisten. Vorschriften der Automobilhersteller beachten!
Mischbarkeit MOFIN M40
Da sich die besonderen Anwendungsvorteile von MOFIN M40 wie verbesserter Aluminium
Schutz und lange Wechselintervalle nur bei alleiniger Verwendung von MOFIN M40 einstellen, wird eine Vermischung mit anderen Kühlerschutzmitteln nicht empfohlen.
MOFIN M40 ist jedoch mit herkömmlichen silikatfreien und silikathaltigen Kühlerschutzmitteln kompatibel.
MOFIN M40 sollte vor dem Einfüllen in den Kühlkreislauf mitWasser* gemischt und in einer Konzentration von 33 bis 50 Vol.% eingesetzt werden.
* Zur Aufbereitung des Kühlmittels muss sauberes, nicht allzu hartes Wasser verwendet werden. Nicht geeignet sind: Grubenwasser, Meerwasser, Brackwasser, Solen und Industrieabwasser.
Die Analysenwerte des Wassers dürfen folgende Grenzwerte nicht
überschreiten:
Wasserhärte: 0 bis 20 °dGH ( 0 – 3,6 mmol/l )
Choridgehalt: max. 100 ppm
Sulfatgehalt: max. 100 ppm
Überschreiten die Analysenwerte des Wassers die zulässigen Grenzwerte, so ist es in geeigneter Weise aufzubereiten wie z.B. durch Zumischen von weichem, destilliertem oder vollentsalztem (VE-) Wasser. Ein zu hoher Chlorid- oder Sulfatgehalt kann auf diese Weise einfach herabgesetzt.
Herstellervorschrift beachten!
Sicherheitshinweise GHS
GHS07: GHS08:
Signalwort:
Achtung
Gefahrenhinweise:
H302: Gesundheitsschä dlich bei Verschlucken.
H373: Kann die Organe schä digen bei lä ngerer oder wiederholter Exposition .
Sicherheitshinweise:
P260: Staub/Rauch/Gas/Nebel/Dampf/Aerosol nicht einatmen.
P264: Nach Gebrauch ... grü ndlich waschen.
P270: Bei Gebrauch nicht essen, trinken oder rauchen.
P301+P312: BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/… anrufen.
P314: Bei Unwohlsein ä rztlichen Rat einholen/ä rztliche Hilfe hinzuziehen.
P501: Inhalt/Behä lter ... zufü hren.
, MOFIN radiator antifreeze M40 – suitable for vehicles requiring a cooling agent according to specification G40.
- Long-term radiator protection
- Premium full concentrate
- Cold protection mixture 50 : 50 -37°C
- Nitrite, amine, phosphate and borax free
- Colour: violet/lilac
- Specifications: VW TL 774 G (Audi, Seat, Skoda, VW), MAN Si-OAT, MB-release 325.5
MOFIN radiator antifreeze M40 is an ethylene glycol-based antifreeze and corrosion protection concentrate for use in engines with or without aluminium alloy.
MOFIN radiator antifreeze M40 protects all modern engines, especially high-performance aluminium engines, against freezing, rust, and overheating.
MOFIN M40 meets the following requirements: VW/Audi/Seat/Skoda/Lamborghini/Bentley/Bugatti TL 774-G Release for MAN 324 type SI-OAT, MB 325.5
Mixture table:
Antifreeze up to ca. | Antifreeze portion | Water portion |
- 18° C | 33% | 67% |
- 38° C | 50% | 50% |
MOFIN M40 can be stored for at least 3 years at temperatures up to 30°C in the unopened, airtight packaging.
MOFIN M40 has a safety information sheet according to EC directive 91/155/EWG.
MOFIN radiator antifreeze M40 is a radiator antifreeze concentrate which can be mixed with normal tap water. The concentration of the radiator antifreeze should not be below 35%, since otherwise the corrosion protection additives are too diluted.
Miscibility of MOFIN M40
Since the special advantages of using MOFIN M40 such as improved aluminium protection and long change intervals only work with the exclusive usage of MOFIN M40, mixture with other antifreezes is not recommended.
MOFIN M40 is compatible with conventional silicate-free and silicate containing antifreezes.
MOFIN M40 should be mixed with water* at a concentration of 33 to 50% vol. before being poured into the cooling circuit.
* When preparing the coolant, clean and not overly hard water must be used. The following are not suitable: mine water, seawater, brackish water, salt water and industrial waste water.
The analysis values of the water may not exceed the following limit values:
- Water hardness: 0 to 20 °dGH ( 0 – 3,6 mmol/l )
- Chloride content: max. 100 ppm
- Sulfate content: max. 100 ppm
If the analysis values of the water exceed the acceptable limit values, it should be treated in an appropriate way, e.g. by mixing with soft, distilled or demineralised (FD) water. A high chloride or sulfate content can be reduced easily in this way.
Safety Advice GHS
GHS07: GHS08:
Signal word:
Warning
Risk Phrases:
H302: Harmful if swallowed
H373: May cause damage to organs ( state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard)
Safety Advice:
P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P264: Wash ... thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P301+P312: IF SWALLOWED: Call a POISON CENTRE/doctor/… if you feel unwell.
P314: Get medical advice/attention if you feel unwell.
P501: Dispose of contents/container to ...